steps to change the delimited to “!”

Below are guideline(s) to  change the delimited to “!” :

1.In the FORGE AG Application
a. makesure the AGX file is correct
b. select startup
c. select your delimited ! will be ASCII 33
d. completed, click the save button

2.  Upload the AG file to your device

  Before click okay, please setting your CPT-8000 device Download port and Upload Port as Cradle IR. Baud rate put 115200.

Place the CPT8000 on the cradle . Click Setting > 6) Load Program.  Then click on OK on the PC.